Project Information (optional)

Project Name

Owner / Client

Project Address

Core Inputs (required)

Agent Type required

Entry Mode required

Flooding Factor (kg/m³) required

Length (m) required

Width (m) required

Height (m) required

Net Volume (m³) required

Design Concentration (% vol) (FM-200 / FK-5-1-12; optional)

Enter a concentration to derive the flooding factor from temperature and altitude, or type the factor directly.

Design Temperature (°C) (20 if blank)

Altitude (m above sea level) (0 if blank)

Occupancy (optional)

Advanced & Safety

Hold Time / Retention (min)

Door Fan Test

Reserve Cylinders

Pipework Material / Approval

Project Logo (optional URL)

Notes

Cylinder Catalog

Profile

FM-200 Sizes (kg) – editable

CO₂ Sizes (kg) – editable

Policy: report uses one cylinder size only (market generic). We choose the size that satisfies requirement with minimal quantity first, then minimal overage.

Get Offer

Results

Agent

Net Volume (m³)

Flooding Factor (kg/m³)

Required Agent (kg)

Catalog Used

Strategy

Single-Size (Min Qty → Min Overage)

Cylinder Breakdown

#	Cylinder Size (kg)	Type	Qty	Subtotal (kg)
Total Gas (kg)				0

Recommended Size

Recommended Quantity

Resulting Overage

System Complements (to be included)

Release Control Panel (double-interlock), UL/FM or LPCB approved
Two independent detectors (cross-zone)
Manual Release & Abort near exit
Pre-discharge audible/visual alarm + Warning signage
HVAC shutdown & door holder release interlock
Pressure Relief Vent (per enclosure pressure calc)
Discharge pressure switch / Supervisory contacts
Nozzles & Pipework (manufacturer hydraulic calc)

Design aid only. Verify with NFPA/ISO & manufacturer datasheets. CO₂ in occupied spaces is generally prohibited; in unoccupied rooms provide pre-discharge alarms, time delay & lock-out.

Feedback Integrated Solutions

Fire Gas Flooding – Summary Report

Project: —

Owner: —

Address: —

Agent: —

Net Volume (m³): —

Flooding Factor (kg/m³): —

Basis: —

Required Agent (kg): —

Cylinder size: —

Quantity: —

Overage (kg): —

Reserve set: None

Hold Time (min): —

Door Fan Test: —

Pipework Spec: —

Occupancy: —

Safety Summary

—

System Complements

Signatures

Prepared by: ____________________

Reviewed by: ____________________

Approved by: ____________________

Notes

—

This summary is a design aid. Final design must be verified against NFPA/ISO standards and manufacturer hydraulic calculations. CO₂ in occupied spaces is generally prohibited; if used in unoccupied rooms, provide pre-discharge alarms, time delay and lock-out.